Security Systems
Page 31 of 38
Low bandwidth
• Low bandwidth connections: It is recommended not to use forced config changes, if clients are
connected via low bandwidth
•
Configuration/Migration
• Record AAC will not work. Encoders will automatically use G.711 to record audio.
• When an LDAP-User and a local user have the same name and different passwords and different
user groups, Bosch VMS always assigns the user group of the local user. Work-around: Rename
local user
• When the user of Configuration Client scans an existing VRM, the encoder names are renamed
as per default to Bosch VMS names.
• When configuring a Workflow alarm, do not use an action plan containing an URL.
• When using the Initial Device Scan to assign new IP addresses for new devices, do not configure
duplicate IP addresses. )
• Device Family 2: Alarm recording is not taken from stream 2, as configured.
• Reconfiguration of an encoder after encoder replacement is not working properly in large
systems > 500 cameras, if password is left empty
• Verification of encoder and camera name limitation for 32 characters fails for encoders/ cameras
created offline.
• In order to perform IVA search on Enterprise system, workstation needs to be added and
permitted for the respective Management Server in addition to the Operating Permissions.
• Same LDAP user groups can be used only once for one Bosch VMS User Group/ Enterprise
User Group.
• LDAP user cannot clear or overwrite allegiant cameras from AMG. (62207)
• When importing a configuration of a previous BVMS version with less event types (e.g. due to
DVRs added to Rel. 4.5), manual activation and restart of Config Client is required.
• When using VRM versions < 3.0 which do not support Pooling yet, Pool configuration page
shows misleading I/O errors.
• You must configure DVRs using always the (Divar-) admin account.
• Firmware update of VIP XD HD reports false error but works well when updated twice
• VBrick cameras cannot be connected to decoders
• Config Wizard: Scan with multiple NIC's proves unreliable.
o The NIC to the local network has to be connected, the NIC to the public network has to
be disconnected!
• Transcoder IQN not added to IQN table.
o Old FAS without wildcard support are not supported by transcoder.
• CentralServer Service configures wrong time server IP address on VCS devices if Central Server
host has more than one network adapter
o If you have two or more network addresses, make sure that the timeserver entry in the
Management Server config file is set to the correct IP address.
Operation
• When using Find Video By Event, alarm recordings triggered manually by users cannot be found
directly. You must search for the general alarm recording and then sort by user.
• Find Video By Event does not display possible results if detailed filtering criteria is used. It is
recommended to search by defining a time span only.
• When a user adds a sequence to favorites and his user rights for the sequence are withdrawn
afterwards, the user will still be capable of accessing the sequence via favorits .
• Manually triggered alarms (by user event buttons) with a higher priority are not sorted
consistently in the Alarm List.
(156 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales